Phase transition and quasinormal modes for charged black holes in 4D Einstein-Gauss-Bonnet gravity

In four-dimensional Einstein-Gauss-Bonnet(EGB)gravity,we consider the thermodynamic and phase transitions of(charged)AdS black holes.For the negative GB coefficientα<0.the system allows two physical critical points,corresponding to the reentrant phase transition.when the charge Q>2√-α.For arbitraryα>0,the system always leads to a van der Waals phase transition.We then study the quasinormal modes(QNMs)of massless scalar perturbations to probe the van der Waals-like phase transition between small and large black holes(SBH/LBH)for(charged)AdS black holes.We find that the signature of this SBH/LBH phase transition in the isobaric process can be detected since the slopes of the QNM frequencies change dramatically in small and large black holes near the critical point.The obtained results further support that QNMs can be a dynamic probe of ther-modynamic properties in black holes.     

Investigation of mononuclear,dinuclear, and trinuclear transition metal (II) complexes derived from an asymmetric Salamo‐based ligand possessing three different coordination modes

A new asymmetric Salamo‐based ligand H₂L was synthesized using 3‐tert‐butyl‐salicylaldehyde and 6‐methoxy‐2‐[O‐(1‐ethyloxyamide)]‐oxime‐1‐phenol. By adjusting the ratio of the ligand H₂L and Cu (II), Co (II), and Ni (II) ions, mononuclear, dinuclear, and trinuclear transition metal (II) complexes, [Cu(L)], [{Co(L)}₂], and [{Ni(L)(CH₃COO)(CH₃CH₂OH)}₂Ni] with the ligand H₂L possessing completely different coordination modes were obtained, respectively. The optical spectra of ligand H₂L and its Cu (II), Co (II) and Ni (II) complexes were investigated. The Cu (II) complex is a mononuclear structure, and the Cu (II) atom is tetracoordinated to form a planar quadrilateral structure. The Co (II) complex is dinuclear, and the two Co (II) atoms are pentacoordinated and have coordination geometries of distorted triangular bipyramid. The Ni (II) complex is a trinuclear structure, and the terminal and central Ni (II) atoms are all hexacoordinated, forming distorted octahedral geometries. Furthermore, optical properties including UV–Vis, IR, and fluorescence of the Cu (II), Co (II), and Ni (II) complexes were investigated. Finally, the antibacterial activities of the Cu (II), Co (II), and Ni (II) complexes were explored. According to the experimental results, the inhibitory effect was found to be enhanced with increasing concentrations of the Cu (II), Co (II), and Ni (II) complexes.     

Reinforced Supramolecular Hydrogels from Attapulgite and Cyclodextrin Pseudopolyrotaxane for Sustained Intra‐Articular Drug Delivery

Injectable hydrogels for nonsteroidal anti‐inflammatory drugs’ (NSAIDs) delivery to minimize the side effects of NSAIDs and achieve long‐term sustained release at the targeted site of synovial joint are attractive for osteoarthritis therapy, but how to improve its mechanical strength remains a challenge. In this work, a kind of 1D natural clay mineral material, attapulgite (ATP), is introduced to a classical cyclodextrin pseudopolyrotaxane (PPR) system to form a reinforced supramolecular hydrogel for sustained release of diclofenac sodium (DS) due to its rigid, rod‐like morphology, and unique structure, which has great potential in tissue regeneration, repair, and engineering. Investigation on the interior morphology and rheological property of the obtained hydrogel points out that the ATP distributed in PPR hydrogel plays a role similar to the “reinforcement in concrete” and exhibits a positive effect on improving the mechanical properties of PPR hydrogel by regulating their interior morphology from a randomly distributed style to the well‐ordered porous frame structure. The hybrid hydrogels demonstrate good shear‐thinning and thixotropic properties, excellent biocompability, and sustained release behavior both in vitro and in vivo. Furthermore, preliminary in vivo treatment in an acute inflammatory rat model reveals that the ATP hybrid hydrogels present sustained anti‐inflammatory effect.     

Development and validation of a sensitive liquid‐chromatography tandem mass spectrometry assay for mycophenolic acid and metabolites in HepaRG cell culture: Characterization of metabolism interactions between p‐cresol and mycophenolic acid

Mycophenolic acid (MPA), a frequently used immunosuppressant, exhibits large inter‐patient pharmacokinetic variability. This study (a) developed and validated a sensitive liquid chromatography–tandem mass spectrometry (LC–MS/MS) assay for MPA and metabolites [MPA glucuronide (MPAG) and acyl‐glucuronide (AcMPAG)] in the culture medium of HepaRG cells; and (b) characterized the metabolism interaction between MPA and p‐cresol (a common uremic toxin) in this in vitro model as a potential mechanism of pharmacokinetic variability. Chromatographic separation was achieved with a C₁₈ column (4.6 × 250 mm,5 μm) using a gradient elution with water and methanol (with 0.1% formic acid and 2 mm ammonium acetate). A dual ion source ionization mode with positive multiple reaction monitoring was utilized. Multiple reaction monitoring mass transitions (m/z) were: MPA (320.95 → 207.05), MPAG (514.10 → 303.20) and AcMPAG (514.10 → 207.05). MPA‐d₃ (323.95 → 210.15) and MPAG‐d₃ (517.00 → 306.10) were utilized as internal standards. The calibration curves were linear from 0.00467 to 3.2 μg/mL for MPA/MPAG and from 0.00467 to 0.1 μg/mL for AcMPAG. The assay was validated based on industry standards. p‐Cresol inhibited MPA glucuronidation (IC₅₀ ≈ 55 μm ) and increased MPA concentration (up to >2‐fold) at physiologically relevant substrate‐inhibitor concentrations (n = 3). Our findings suggested that fluctuations in p‐cresol concentrations might be in part responsible for the large pharmacokinetic variability observed for MPA in the clinic.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

Porous carbon nanospheres with moderately oriented domains for EDLC electrode

Porous carbon nanospheres with moderately oriented microcrystalline structures were prepared via a relatively simple synthetic route in this article. CTAB acted as a structure‐directing agent to induce small sulfonated pitch (SP) pieces to assemble orderly. By this means, the formation of carbon nanospheres was simultaneous with the moderate orientation of carbon microcrystalline without additional process. Owing to the moderately oriented microcrystalline structures, the resultant sample CNS3 possessed a high e‐conductivity of 62.5 S/m. When used as an electrode material for EDLCs, it showed excellent electrochemical properties even without any conductive agent. In an organic electrolyte, the resultant sample CNS3 possessed a high specific capacitance of 155 F/g at 20 A/g and outstanding cycle life with 94.2% capacity retention after 10,000 cycles. This work puts forward a novel design for carbon nanospheres with moderately oriented domains by a simple and energy‐efficient means.     

Twining Poly(polyoxometalate) Chains into Nanoropes

Organic polymers and inorganic clusters belong to two different disciplines and have completely different properties and structures. When a cluster is attached to the backbone of a polymer as a pendant, the resultant hybrid polymers (polyclusters) exhibit unique behaviours totally different from those of conventional polymers owing to the nanoscale size of the cluster and its particular interactions. Herein, the aggregation of a poly(polyoxometalate)—a polynorbornene backbone with inorganic polyoxometalate cluster pendants—upon addition of a non-solvent to its dilute solution is reported. A three-dimensional network of tangled and snake-like nanothreads was observed. Direct visualisation of individual nanoscale clusters enabled identification of single chains within the nanothreads. These observations suggest that during the process of aggregation, the hybrid polymer forms curved or extended chains as a consequence of an armouring effect in which the collapsed cluster pendants wrap around the backbone. The collapse occurs because they become less soluble in the solvent/non-solvent mixture. The extended chains then become entwined and form nanoropes consisting of multiple chains wound around each other. This study provides a deeper understanding of the nature of polyclusters and should also prove useful for their future development and application.     

Unusual Hypochlorous Acid (HClO) Recognition Mechanism Based on Chlorine–Oxygen Bond (Cl−O) Formation

One of the most important endogenous reactive oxygen species, hypochlorous acid (HClO), is involved in numerous pathological and physiological processes. Herein, a near-infrared fluorescence probe (CyHR) was designed and synthesized for ultrafast (within 0.2 s), sensitive (limit of detection=39.44 nm ), and selective response to HClO. The reaction mechanism was systematically analyzed by MS, ¹H NMR spectroscopy, HPLC-MS techniques, and theoretical calculations. The results indicated that HClO can be recognized by CyHR, which is based on chlorine–oxygen (Cl−O) bond formation. To the best of our knowledge, this study is the first to find Cl−O bonds among organic aromatic compounds, given that Cl−O bonds are common among inorganics. Through biological experiments, CyHR was successfully applied to image exogenous and endogenous HClO in macrophage cells (RAW 264.7). Thus, CyHR is a promising tool for HClO-related physiological and pathological studies and may provide a means for designing HClO-specific fluorescence probes.     

基于吸收系数的生脉注射液中聚山梨酯80含量测定新方法

聚山梨酯80又名吐温80，为一种亲水型非离子表面活性剂，是食品、保健品和药品中常用的辅料，作为增溶剂和澄清剂广泛用于中药注射剂。近年来，不良反应的发生使得聚山梨酯80的质量和应用愈加受到重视，有研究认为其加入可能引起注射剂不良反应增加。为避免超量使用，有必要对该辅料的投料加以严格控制。中药注射剂中聚山梨酯80的含量测定是当下研究的热点和难点，可以通过分光光度法、分子排阻-蒸发光散射检测法(SEC-ELSD)、液质联用法(LC-MS)直接测定，也可以水解后法经液相色谱-紫外检测法(HPLC-UV)或气相色谱法(GC)间接测定。但由于聚山梨酯80为聚氧乙烯聚合数目不同的混合物、不同厂家生产的聚山梨酯80化学组分及比例存在较大差异，难以采用统一的转换公式或对照品准确定量。此外，中药注射剂的复杂基质造成的假阳性干扰也对定量提出了挑战。为解决以上问题，以生脉注射液为例，提出基于吸收系数的中药注射剂中聚山梨酯80含量测定新方法。优化检测波长、显色剂种类、液液萃取过程振荡和静置时间，在6个不同品牌仪器上测得聚山梨酯80-硫氰酸钴配合物的吸收系数(E1%_{1 cm})为104.23，相对标准偏差(RSD)为2.08%。生脉注射液稀释10倍后，精密量取供试品溶液1.0 mL，精密加入硫氰酸钴溶液10 mL，二氯甲烷20 mL，涡旋振荡3 min。将混合液移至分液漏斗中，静置30 min，取下层二氯甲烷液，将前1 mL弃去，接收约15 mL，在320 nm处测定吸光度，再根据Lambert-Beer定律，利用获得的吸收系数计算得到聚山梨酯80的含量。方法阴性无干扰，精密度和重复性相对标准偏差均低于3%，平均回收率为98.42%。为进一步验证方法的准确性，分别采用吸收系数法和标准曲线法测定了2个厂家的10批生脉注射液，并与实际投料量比较。配对t检验结果表明，当置信度为95%时，两种方法无显著性差异，吸收系数法测得结果与企业生产中聚山梨酯的实际投料量也无显著性差异。研究采用前人未采用的、灵敏度更高的320 nm为检测波长，显著降低了基质干扰，克服了中药注射剂中聚山梨酯80测定结果与实际投料量难以吻合的问题。吸收系数法无需使用对照品，亦不用制备标准曲线，可为中药注射剂中聚山梨酯80的检查标准提供切实可行的解决方案。所建方法灵敏、准确、快速、简便，为含聚山梨酯80制剂的质量控制提供了关键常数及新的思路。